How to Alter Collar on Racerback Tank Top
Are you tired of your racerback tank top collar not fitting quite right? Whether it’s too tight or too loose, altering the collar can make a big difference in the comfort and style of your favorite top. In this article, we’ll guide you through the steps to alter the collar on a racerback tank top, so you can achieve the perfect fit every time.
Materials Needed:
– Scissors
– Measuring tape
– Thread and needle
– Pins
– Seam ripper (optional)
Step 1: Assess the Problem
Before you start, take a moment to assess the problem. Is the collar too tight, too loose, or does it not lay flat? Understanding the issue will help you determine how much to adjust the collar.
Step 2: Measure the Collar
Use a measuring tape to measure the length and width of the collar. This will give you a baseline to work from when making adjustments.
Step 3: Mark the New Collar Measurements
Based on your assessment and measurements, mark the new collar measurements on the fabric. For a tighter collar, mark the new measurements slightly smaller than the original. For a looser collar, mark the new measurements slightly larger. Make sure to mark the center back of the collar for symmetry.
Step 4: Remove the Original Collar
Using a seam ripper, carefully remove the original collar from the tank top. Be sure to leave the seam allowances intact to use as a guide for the new collar.
Step 5: Cut the New Collar Fabric
Using the marked measurements, cut the new collar fabric. If you’re replacing the entire collar, cut two pieces of fabric. If you’re just adjusting the width, cut one piece of fabric.
Step 6: Hem the Edges
With right sides together, pin the new collar fabric pieces together along the short edges. Sew the edges with a 1/4-inch seam allowance, then turn the collar right side out and press.
Step 7: Attach the New Collar
Pin the new collar to the tank top, matching the center back. Sew the collar to the tank top, using the original seam allowances as a guide. Be sure to reinforce the stitching at the center back for durability.
Step 8: Trim and Press
Trim any excess thread and press the collar flat. This will ensure a clean finish and a comfortable fit.
And there you have it! Your racerback tank top now has the perfect collar for your style and comfort. By following these simple steps, you can easily alter the collar on your favorite racerback tank top and make it fit just right.
