How to Jump a 2016 Dodge Journey
Jumping a car, also known as a “jump start,” is a common situation that can arise when your vehicle’s battery dies. Whether you’re stranded on the side of the road or simply need to get your 2016 Dodge Journey up and running, knowing how to perform a jump start is essential. In this article, we’ll guide you through the process of jump-starting your 2016 Dodge Journey, ensuring that you can get back on the road safely and efficiently.
Before You Begin
Before you start the jump-starting process, it’s crucial to ensure that you have the necessary tools and safety precautions in place. Here’s what you’ll need:
1. A set of jumper cables: These are typically red and black and come with clips on each end.
2. Another vehicle with a fully charged battery: This vehicle will be used to provide the power needed to jump-start your 2016 Dodge Journey.
3. Safety glasses: These will protect your eyes from any sparks or debris that may occur during the jump-start.
4. A flashlight: This will help you see in the dark or low-light conditions.
Step-by-Step Guide to Jump-Starting Your 2016 Dodge Journey
1. Park the other vehicle close to your Dodge Journey, ensuring that both vehicles are turned off and the keys are removed from the ignition.
2. Connect the positive (red) jumper cable to the positive terminal of your Dodge Journey’s battery. The positive terminal is typically marked with a plus sign (+) and is usually larger than the negative terminal.
3. Connect the other end of the positive jumper cable to the positive terminal of the other vehicle’s battery.
4. Connect the negative (black) jumper cable to the negative terminal of the other vehicle’s battery. The negative terminal is typically marked with a minus sign (-) and is usually smaller than the positive terminal.
5. Connect the other end of the negative jumper cable to an unpainted metal surface on your Dodge Journey’s engine block. This will act as a ground and help prevent sparks from igniting hydrogen gas that may be present in the engine compartment.
6. Have the driver of the other vehicle start their engine and let it run for a few minutes to charge your Dodge Journey’s battery.
7. Once your Dodge Journey’s battery is charged, remove the negative jumper cable from the engine block first, then disconnect it from the other vehicle’s battery. Finally, remove the positive jumper cable from both batteries.
8. Start your Dodge Journey and let the engine run for a few minutes to ensure that the battery is fully charged.
Conclusion
Jump-starting your 2016 Dodge Journey is a straightforward process that can help you get back on the road quickly. By following these steps and taking the necessary safety precautions, you can ensure that you’re prepared for any unexpected battery-related issues. Remember to keep jumper cables and safety equipment in your vehicle at all times to be prepared for any situation.
