How to Alter the Crotch Length on Redimade Pants
Redimade pants, also known as upcycled pants, offer a sustainable and creative way to breathe new life into old denim. However, even with the best intentions, the crotch length might not fit your desired style or comfort level. Don’t worry; altering the crotch length on redimade pants is a straightforward process that requires minimal sewing skills and materials. In this article, we will guide you through the steps to successfully adjust the crotch length on your redimade pants.
Materials Needed:
– Seam ripper
– Fabric scissors
– Measuring tape
– pins
– Sewing machine or needle and thread
– Chalk or fabric pen
– Iron and ironing board
Step 1: Measure and Mark the New Crotch Length
– Begin by taking measurements from the waistband to the desired crotch length. Ensure you have enough length for comfortable movement.
– Place the pants on a flat surface and use a measuring tape to mark the new crotch length on both the front and back pant legs.
– If you prefer a gradual change in length, you can mark several points along the seam for a more gradual adjustment.
Step 2: Remove the Seam and Hem
– Using a seam ripper, carefully remove the stitching from the inseam of the pants, starting from the bottom of the crotch seam and working your way up to the waistband.
– Once the inseam is open, remove the hem and the excess fabric at the bottom of the pants.
Step 3: Cut the Fabric
– Using fabric scissors, cut the inseam along the marked line. Be sure to cut the fabric straight and perpendicular to the original seam.
– If you marked several points for a gradual change in length, cut along those lines instead.
Step 4: Re-Attach the Seam
– Fold the fabric back to its original position and align the edges.
– Pin the fabric in place, ensuring that the edges are even and the original seam line is preserved.
– Using a sewing machine or needle and thread, sew the inseam back together, following the original seam line.
Step 5: Hem the Pants
– Once the inseam is re-attached, fold the bottom edge of the pants back to its original hem length.
– Press the hem with an iron to create a crisp edge.
– Using a needle and thread or a sewing machine, sew the hem in place, securing the bottom edge of the pants.
Step 6: Final Touches
– Inspect the inseam and hem for any loose threads or uneven stitching.
– Press the entire pant leg with an iron to ensure a smooth finish.
Now you have successfully altered the crotch length on your redimade pants. Enjoy your newly fitted and stylish upcycled denim!
