How to Peel and Stick Wallpaper Behind Toilet
Peeling and sticking wallpaper behind the toilet is a practical and stylish way to update your bathroom without the hassle of traditional wallpapering methods. This guide will walk you through the steps to ensure a seamless and professional-looking finish. Whether you’re a DIY enthusiast or a novice, following these instructions will help you achieve a beautiful and durable wallpapered space.
Materials Needed:
Before you begin, gather all the necessary materials to make the process as smooth as possible. Here’s a list of items you’ll need:
– Peel and stick wallpaper
– Scissors or a craft knife
– Measuring tape
– Level
– Utility knife
– Paste brush
– Wallpaper paste
– Soft cloth or sponge
– Warm water
– Drywall primer (if necessary)
Preparation:
1. Clean the surface: Ensure the toilet area is clean and dry. Remove any old wallpaper, adhesive, or mildew. If the surface is uneven or has visible cracks, apply a coat of drywall primer to create a smooth, even surface.
2. Measure and cut the wallpaper: Measure the height and width of the toilet area. Add an extra inch to each measurement to account for trimming. Cut the wallpaper to size using scissors or a craft knife.
3. Prepare the wallpaper: If your wallpaper requires it, apply the manufacturer’s recommended adhesive to the back of the wallpaper. Follow the instructions on the packaging for the best results.
Installation:
1. Position the wallpaper: Start by placing the top edge of the wallpaper at the highest point on the wall, such as above the toilet tank. Use a level to ensure it’s straight.
2. Peel and stick: Begin peeling off a small section of the backing, revealing the adhesive. Apply the wallpaper to the wall, smoothing it out with your hands or a soft cloth. Be sure to remove any air bubbles as you go.
3. Trim the edges: Once the wallpaper is in place, use a utility knife to trim off any excess material. Be careful not to cut into the adhesive.
4. Clean up: Wipe away any excess adhesive with a damp cloth or sponge.
Finishing Touches:
1. Allow the wallpaper to dry: Give the wallpaper at least 24 hours to dry and adhere properly.
2. Check for bubbles: After the wallpaper has dried, inspect the surface for any air bubbles. If you find any, gently press them out with a pointed object, such as a needle.
3. Maintain your wallpaper: To keep your wallpaper looking fresh and new, clean it regularly with a soft cloth and warm water. Avoid using harsh chemicals or abrasive cleaners.
By following these simple steps, you’ll be able to peel and stick wallpaper behind the toilet like a pro. Enjoy your beautiful, updated bathroom!
