How to Make Your Own Rosin Press
Rosin pressing has become increasingly popular in the cannabis industry, as it allows for a high-quality, solventless extraction method. However, purchasing a commercial rosin press can be quite expensive. In this article, we will guide you through the process of how to make your own rosin press, so you can enjoy the benefits of rosin pressing without breaking the bank.
Materials Needed
Before you start building your rosin press, you’ll need to gather the following materials:
1. Aluminum foil or parchment paper
2. Two wooden blocks (sized to fit your rosin press)
3. A flat, smooth surface (such as a table or countertop)
4. A hammer or mallet
5. A vice grip or clamp
6. A pair of pliers
7. Two metal rods or rods made from sturdy metal tubing
8. A metal hinge (optional, for added stability)
9. A drill and drill bits
10. Screws and nuts
11. A pair of gloves (for safety)
12. Safety goggles (for safety)
Step 1: Assemble the Base
Start by placing one wooden block on a flat, smooth surface. Take the metal rods or metal tubing and position them at the corners of the wooden block. Use the drill and drill bits to create holes for the screws and nuts that will hold the rods in place. Once the holes are drilled, secure the rods to the wooden block using the screws and nuts.
Step 2: Attach the Hinge (Optional)
If you choose to add a hinge for added stability, now is the time to do so. Drill holes for the hinge and screws in the second wooden block, and then attach the hinge to both blocks.
Step 3: Attach the Second Block
Place the second wooden block on top of the base you just assembled. Use the vice grip or clamp to hold the blocks together while you secure them with screws and nuts.
Step 4: Secure the Metal Rods
Now that the blocks are securely attached, use the pliers to bend the metal rods at a 90-degree angle. These will serve as the pressing surfaces for your rosin press. Place the rods in the holes you previously drilled and secure them with screws and nuts.
Step 5: Add Safety Features
To ensure your rosin press is safe to use, wear gloves and safety goggles while handling the tools and materials. Additionally, consider adding a metal hinge for added stability, and make sure the pressing surface is flat and even.
Step 6: Test Your Rosin Press
Before using your rosin press for actual rosin pressing, test it by placing a small amount of cannabis material between the pressing surfaces. Use the hammer or mallet to apply pressure, and observe how the rosin is extracted. Adjust the pressing surfaces as needed to ensure even pressure.
Conclusion
Now that you know how to make your own rosin press, you can enjoy the benefits of high-quality rosin without the high cost of a commercial press. Just remember to prioritize safety and ensure your rosin press is properly assembled and stable before using it. Happy pressing!
