How to Use Edge Joining Presser Foot
The edge joining presser foot is a versatile and essential tool for sewists who want to achieve professional-looking seams and joins. Whether you are working on clothing, home decor, or any other sewing project, this presser foot can help you create clean and precise edges. In this article, we will guide you through the steps to use the edge joining presser foot effectively.
Understanding the Edge Joining Presser Foot
Before diving into the usage, it’s important to understand the purpose of the edge joining presser foot. This foot is designed to create a tight and secure join between two pieces of fabric, especially when the edges need to be concealed. It is commonly used in projects that require a flat, finished edge, such as making hems, binding, and piping.
Preparing Your Sewing Machine
To begin using the edge joining presser foot, ensure that your sewing machine is properly set up. Place the foot on the machine and secure it according to the manufacturer’s instructions. Make sure the foot is properly aligned with the needle and press down on the foot lever to lock it in place.
Choosing the Right Thread and Needle
Select a thread that matches the color of your fabric for a seamless look. It’s important to use a needle that is suitable for your fabric type and thread. A sharp needle is recommended for woven fabrics, while a ballpoint needle works well for knits.
Attaching the Edge Joining Presser Foot
To attach the edge joining presser foot, simply place it on top of the presser foot holder. Make sure it is aligned with the machine’s needle and press down on the foot lever to secure it. The edge joining presser foot usually has a small hole or indentation that corresponds to the machine’s needle position.
Seaming the Edges
Now that the edge joining presser foot is in place, you can start seaming the edges of your fabric. Begin by aligning the edges of the two pieces of fabric that you want to join. Place the edge joining presser foot on top of the fabric and lower the presser foot lever to hold the fabric in place.
Adjusting the Machine Settings
Set your sewing machine to the appropriate stitch length and width for your project. The stitch length should be slightly longer than the width of the seam allowance to ensure a secure join. Adjust the tension if necessary to achieve a balanced stitch.
Sewing the Edges Together
With the edge joining presser foot in place, start sewing the edges together. Begin at one end and sew slowly, ensuring that the fabric is properly guided by the presser foot. Pay attention to the stitching line and make any necessary adjustments to maintain a consistent and even seam.
Finishing the Join
Once you have sewn the entire edge, trim any excess thread and remove the fabric from the machine. Use your fingers to gently press the seam open, creating a flat edge. If desired, you can topstitch the seam for added strength and a polished finish.
Conclusion
Using the edge joining presser foot is a simple and effective way to achieve clean and precise edges in your sewing projects. By following these steps and understanding the proper usage of the foot, you can create professional-looking seams and joins with ease. Happy sewing!
