How to Replace Hand Held Shower Head and Hose
Replacing your hand held shower head and hose is a simple task that can significantly improve your showering experience. Whether your current equipment is outdated, damaged, or simply not functioning as it should, a new hand held shower head and hose can make a world of difference. In this article, we will guide you through the process of replacing your hand held shower head and hose step by step.
Materials Needed:
Before you begin, gather the following materials:
– New hand held shower head
– New shower hose
– Tube of plumber’s grease or plumber’s tape
– Adjustable wrench or pliers
– Screwdriver (if necessary)
– Teflon tape (optional)
Step 1: Turn Off the Water Supply
The first step in replacing your hand held shower head and hose is to turn off the water supply to your shower. This can typically be done by turning the valves located behind the shower wall or by turning off the main water supply to your home.
Step 2: Remove the Old Shower Head and Hose
Once the water supply is turned off, you can proceed to remove the old shower head and hose. If your shower head is attached to the wall, you may need to use an adjustable wrench or pliers to loosen the connections. If the shower head is detachable, simply unscrew it from the hose.
Step 3: Clean the Connections
After removing the old shower head and hose, clean the connections where the new equipment will be attached. This will ensure a secure and leak-free connection. Use plumber’s grease or plumber’s tape on the threads of the connections to create a better seal.
Step 4: Attach the New Shower Head
Now, attach the new hand held shower head to the hose. If the shower head is detachable, screw it onto the hose using your hands or a screwdriver. If the shower head is wall-mounted, thread it onto the wall connection and tighten it with the adjustable wrench or pliers.
Step 5: Attach the New Shower Hose
Attach the new shower hose to the shower head. If the hose has a threaded connection, screw it onto the shower head using your hands or a screwdriver. If the hose has a push-fit connection, simply push it onto the shower head until it clicks into place.
Step 6: Test the New Equipment
With the new hand held shower head and hose installed, turn on the water supply and test the equipment. Make sure there are no leaks and that the shower head operates smoothly. If everything is functioning correctly, you have successfully replaced your hand held shower head and hose.
Conclusion:
Replacing your hand held shower head and hose is a straightforward process that can enhance your showering experience. By following these simple steps, you can ensure a leak-free and efficient shower. Remember to always turn off the water supply before beginning the replacement process and to use the proper materials for a secure connection. Happy showering!
