How to Install a Hand Held Shower Wand: A Step-by-Step Guide
Installing a hand held shower wand can be a straightforward and rewarding DIY project that enhances your shower experience. Whether you’re looking to upgrade your existing shower system or add a new feature, this guide will walk you through the process step by step. Follow these instructions to install your hand held shower wand successfully.
Step 1: Gather Your Tools and Materials
Before you begin, make sure you have all the necessary tools and materials. You’ll need a screwdriver, adjustable wrench, pliers, plumber’s tape, and a replacement hand held shower wand if needed. It’s also a good idea to have a bucket or sponge on hand to catch any drips or spills.
Step 2: Turn Off the Water Supply
Safety first! Before you start working on your shower, turn off the water supply to the shower by turning the valves located behind the shower. This will prevent any water from flowing while you work.
Step 3: Remove the Existing Shower Head
Next, remove the existing shower head. Use the adjustable wrench to loosen the connection between the shower arm and the head. Once it’s loose, remove the shower head and inspect the shower arm and threading for any signs of damage or corrosion.
Step 4: Clean the Shower Arm
Clean the shower arm thoroughly to ensure a proper fit for the new hand held shower wand. Remove any old plumber’s tape or debris and wipe down the area.
Step 5: Attach the Hand Held Shower Wand
Attach the hand held shower wand to the shower arm. Thread the wand into the arm and tighten it with the adjustable wrench. Apply plumber’s tape to the threads for a secure connection and to prevent leaks.
Step 6: Connect the Hand Held Shower Wand to the Water Supply
Now, it’s time to connect the hand held shower wand to the water supply. Thread the wand’s female end onto the water line and tighten it with the adjustable wrench. Again, apply plumber’s tape to the threads to ensure a leak-free connection.
Step 7: Test the Hand Held Shower Wand
Turn the water supply back on and test the hand held shower wand. Make sure there are no leaks at the connections and that the wand operates smoothly. If everything looks good, you can proceed to the final step.
Step 8: Attach the Shower Head and Test Again
Reattach the shower head to the shower arm, following the same steps as before. Once the head is securely in place, turn the water supply back on and test the entire shower system. Ensure that both the hand held shower wand and the fixed shower head work as expected.
Congratulations! You’ve successfully installed your hand held shower wand. Enjoy the convenience and flexibility of a versatile showering experience.
