How to Use Scotts Hand Held Spreader
Using a Scotts hand held spreader is a convenient and efficient way to apply fertilizers, seeds, or pesticides to your lawn or garden. This article will guide you through the steps of using the Scotts hand held spreader to ensure you achieve the best results for your landscaping needs.
1. Preparation
Before using the Scotts hand held spreader, it is essential to prepare the area you want to apply the product to. Clear any debris, such as rocks, sticks, or weeds, from the area to ensure an even application. Also, ensure that the spreader is clean and free of any old product residue.
2. Loading the Spreader
To load the Scotts hand held spreader, follow these steps:
– Open the hopper lid and fill it with the desired product, such as fertilizer, seeds, or pesticides.
– Close the hopper lid securely to prevent any product from spilling.
– Adjust the settings on the spreader to the appropriate rate for the product you are using.
3. Setting the Spreader
The Scotts hand held spreader comes with adjustable settings to control the amount of product applied. To set the spreader:
– Locate the rate control lever on the handle.
– Turn the lever to the desired rate setting, which is usually indicated on the spreader with a number or a range of numbers.
– For best results, refer to the product’s instructions or the spreader’s manual to determine the correct rate for your application.
4. Spreading the Product
Now that the spreader is loaded and set, it’s time to apply the product:
– Push the spreader across the area you want to cover, walking in straight lines and overlapping slightly to ensure even coverage.
– For larger areas, it may be helpful to divide the area into smaller sections and work your way through each section.
– To avoid over-spraying, keep the spreader moving at a consistent pace and avoid stopping or pausing while spreading.
5. Cleaning the Spreader
After you have finished spreading the product, it is crucial to clean the spreader to prevent any remaining product from attracting pests or causing damage to your plants:
– Open the hopper lid and remove any remaining product.
– Empty the spreader into a trash bag or a designated container for disposal.
– Use a brush or a rag to clean the hopper and the spreader’s mechanism, ensuring that no product residue remains.
By following these steps, you can effectively use the Scotts hand held spreader to apply fertilizers, seeds, or pesticides to your lawn or garden. Always refer to the product’s instructions and the spreader’s manual for specific recommendations and safety precautions. Happy spreading!
